Want to extend your shaft? Choose from 0.5in or 1.0in!

We are listing the quantity you need!! Please contact us.
★ You can extend your existing shaft by 0.5 inches or 1 inch. Simply attach it to the butt end of the shaft for easy extension.
* When working, lightly sand both bonding surfaces with sandpaper or similar to ensure good adhesion.

* Always use adhesive (acrylic or epoxy). * Please check the inner diameter of your butt end against the product size and use accordingly.
************
Price: ¥500 per piece
Additional pieces: ¥280 each (We will adjust the price if you wish to add more)
*******
Please check the butt diameter of your shaft before use!! Please specify one of the following:
---------
- ★ Size (approx.) 0.5 inches ★ Total Length x Bonding Part x Thickness 0.5 inch type... 31.0mm x 18.3mm x 15.0mm / Weight 4.7g
------
★ Size (approx.) 1 inch ★ Total Length x Bonding Part x Thickness 1.0 inch type... 46.1mm x 20.6mm x 15.0mm / Weight 7.4g
--------

★ The inside of the part is not hollow. ★ Material: ABS * If you do not apply adhesive properly, the bonded part may come off, causing play within the grip and requiring re-adhesion. Furthermore, shaft extension is not recommended, so please be aware of potential accidents during use (e.g., shaft or product breakage).
* Please use at your own risk.

[Basic Swing Weight Change Table]

Adding weight (reducing weight) to the head: approx. 1.5-2.5g, 1 point up (down)
Adding weight (reducing weight) to the grip end: approx. 4g, 1 point down (up)
Reducing weight (adding weight) to the shaft: approx. 5-10g, 1 point down (up)
Reducing weight (adding weight) to the grip: approx. 5g, 1 point up (down)
Making the club longer (shorter): approx. 1 inch, 5-6 points up (down)

* The above are basic values and will vary depending on the club's length, center of gravity, etc. The point changes become more sensitive as the club gets longer.
◎ Please use the purchased product at your own risk.
* The listed sizes and weights are manufacturer specifications. There may be slight errors.